- REALE
- CHINA
- 15 days after deposit
- 30 sets one month
Huanrui testing equipment meets the standards of GB, ISO, BS, ASTM, UL, JIS, ICE and so on. Customized products are available upon request.
IPX34/IPX56 Rain Spraying Resistance Testing Cabinet
Product information
The rain test chamber is mainly suitable for the external lighting, signal devices and automobile lamp enclosure protection test of electronic and electrical, aerospace, military and other scientific research units.
Installation site of Rain Spraying Resistance Testing Cabinet:
1.No strong vibration, no high concentration of dust and corrosive substances in the 2.surrounding environment
3.Avoid strong airflow. Keep ventilated
4.Place it smoothly and keep it level
Model | RAI-800 | RAI-1000 | |
Inner Size(cm) | 800*800*800 | 1000*1000*1000 | |
Outer Size(cm) (W x D x H) | 1080*1180*1540 | 1200*1380*1760 | |
Weight(kg) | 250kg | 300kg | |
Temp.Range | RT-100℃ | ||
Diameter of spray hole | Ø 0.4mm | ||
Distance between nozzles | 50mm | ||
Number of injectors | 25 | ||
Spray ring radius | 400mm | ||
Diameter of nozzle tube | Ø16mm | ||
Rotation nozzle | 0 ° ～ 180 ° | ||
Speed of rotation | 0 ～ 20 times | ||
Required supply water pressure | 80Kpa - 100 Kpa | ||
Material of spray pipe | SUS 304 | ||
Water temperature | 15℃-30℃ | ||
Control mode | Set parameters on the digital display | ||
View window | Made of tempered glass (310 × 420mm) and with LED lights | ||
Control system | Equipped water protection | ||
Voltage and frequency | AC380V±10% ,50Hz±10% . Three phase four wire + protective ground wire | ||
Installed power | 3.0kW | ||
Protective grounding resistance | Protective earthing wire grounding resistance is less than 4Ω | ||
Switch | A. The user is required to configure the leakage protection air switch of the corresponding capacity for the equipment at the installation site, and the switch must be used independently for the device. B. It is forbidden to use the knife switch or power socket. C. The leakage protection air switch is no more than 2 meters away from the equipment. | ||
Water source requirement | 1) 1. The user is required to configure the water source for the equipment at the installation site, the water pressure is not less than 0.2Mpa, and the 4-point faucet is installed. 2) 2. The position of the faucet is no more than 2 meters away from the equipment. | ||
